About the product : Parquet glue on the basis of water and PVA, one-component, ready for use, without solvent.  

Properties : Excellent gluing ability of the parquet to the surface and does not sticks off.  Easily used and dries quickly. Surface resistance is quite high. Highly resistant to moisture and chemical materials. Provides filling of surface roughness and the best gluing ability of parquet. Odorless.

Application area : Used for gluing any kind of parquet to concrete, ceramics, wood and also on marble surfaces.  

Application : Before applying PVA Parquet glue, the surface must be completely free from dirt, grease, dust and substances like sand which will prevent sticking. The floor must be clean, durable and dry. Ready to use, no need to dilute. It is applied with a notched trowel and brush to the surface. Stir well before use. During use, the ambient temperature must be above +10 °C.

Consumption : 1 kg. PVA Parquet glue can be applied in one layer on the surface of 1 m².

Storage : Stored non-falling direct sunlight in unopened original containers for up to 3 years at 5-35 °C ambient temperature. It should be protected from excessive heat and moisture.     

Safety : 

S 2               : Keep out of the reach of children.

S 3/7/9         : Keep container tightly closed in a cool, well-ventilated place.

S 24/25        : Avoid contact with skin and eye.

S 29             : Do not empty into drains.

S 46             : If swallowed, seek medical advice immediately and show this container or label.

S 51             : Use only in well-ventilated areas.

Note : The manufacturer company is not responsible for any defects or results if the instructions for use and storage of products are not followed !