About the product : Silicone protective impregnation product.
Properties : Stone protector resistant to all weather conditions and durable. It is moisture resistant, water resistant and allows the surface to “breathe”. Doesn`t violate the natural look of the surface and environmentally friendly. Resistant to UV rays. Does not crack or fall.
Application area : It is confidently used on the surface for protective impregnation in stones (the basis of a natural and synthetic mineral), in concrete and concrete blocks (YTONG) etc.
Application : The surfaces must be cleaned of swollen, old and soft paint. The surface must be firm, dry and clean; cracks and empty spaces on the surface must be repaired. The surfaces must be cleaned of swollen, old and soft paint. The surface must be firm, dry and clean; cracks and empty spaces on the surface must be repaired.
Consumption : Depending on the surface, l lt SOBSET can be impregnated in one layer for an area of 3-10m². (Fiber cement: 8-10 m², Concrete: 3-5 m², Natural stone: 2-4 m², Brick: 2-3 m², Advanced Concrete: 1 m²).
Storage : It can be stored non-falling direct sunlight in unopened original containers for up to 3 years at 5-35 °C. It should be protected from excessive heat and moisture.
Safety :
S 2 : Keep out of the reach of children.
S 3/7/9 : Keep container tightly closed in a cool, well-ventilated place.
S 16 : Keep away from sources of ignition - No smoking!
S 24/25 : Avoid contact with skin and eye.
S 29 : Do not empty into drains.
S 46 : If swallowed, seek medical advice immediately and show this container or label.
S 51 : Use only in well-ventilated areas.
Note : The manufacturer company is not responsible for any defects or results if the instructions for use and storage of products are not followed !
*4545
Sign In
Water based paints
